Husqvarna BZ7234TD/968999264 Checking the Hydraulic System, Checking Battery, 1.125 gal, sion

MAINTENANCE

Checking the Hydraulic System

Total System Capacity 1.125 gal.

To check the hydraulic fluid level, locate the hydraulic reservoir under the seat. Remove cap and check level. Fill to 1/4" from top of tank

WARNING!

If a leak is suspected, use a piece of cardboard or wood, NOT your hands. to check for leaks.

Escaping hydraulic oil under pres- sure can have sufficient force to

penetrate the skin, causing seri-

ous injury.Hydraulic reservoir

Ifinjured by escaping fluid, see a doctor at once. Serious infection or reaction can develop if proper medical treatment is not adminis- tered immdediately.

Checking Battery

The factory installed battery is “Low Maintenance”.

Add liquid only as needed.

BAM-21

WARNING!

UNTRAINED/UNAUTHORIZED persons should NEVER attempt to service or recharge the battery in

this unit.	Battery	BAM-21
Battery electrolyte is an acidic
solution and should be handled
with care. If electrolyte is splashed
on any part of the body, immedi-
ately flush the exposed area with
liberal amounts of water and ob-		WARNING!
tain medical aid immediately.
		DO NOT allow flames or sparks
		near a battery when connecting
		for jump starting or charging.
NOTE: Keep top of battery clean and free of		Hydrogen gas is produced during
corrosion by washing with a solution of baking		the charging process and can be
soda and water OR ammonia and water. Rinse		explosive. Provide adequate ven-
with clean water. Batteries with heavy corrosion		tilation to prevent possible explo-
should be removed and cleaned with solution.		sion.
Battery cable should be disconnected before using
a “Fast Charger”.

42