OPERATION
Stopping the Engine
Allow the engine to idle a minute in order to attain normal operating temperature before stopping it if it has been worked hard. Avoid idling the engine for long periods.
1.Disengage the mower deck by depressing the control.
2.On manual decks raise the mower deck by pulling the lifting lever backward to the transport position.
3.On power decks raise the deck by pulling back the hydraulic switch on the console.
4.Move the throttle to the minimum position (tortoise symbol). Turn the ignition key to the stop position.
5.Move the steering controls outward.
6.When the mower is standing still, activate the parking brake by pulling the lever back.
Moving by Hand
In order for the machine to be moved with the engine turned off, the system relief valve on both hydraulic pumps must be opened counter clockwise
WARNING!
Make no adjustments without:
-the engine stopped,
-the ignition key removed,
-the parking brake activated.
BAM - 2
Disengaging the mower deck
Raise the mower deck with the lifting lever on manual decks
System relief valve on the hydraulic pump
33