3. Remove the lid and the funnel.
A |
4.Unscrew the valve in counter clockwise (pay particular attention not to lose the Valve Gasket because is necessary to a correct functioning of the features ).
5.Clean the tank lid, the valve and the gasket with a solution of warm water and neutral soap. Rinse it and put it in- side the door hole during the cleaning of the other components (in order to avoid cold air leakage from the fridge).
6.Clean the tank and the funnel into the dishwasher or with a solution of warm water and neutral soap and rinse them.
electrolux 11
7.After the tank components cleaning take back the valve from the fridge door and assembly the tank in the in- verse order (4;3;2;1) of disassembly (pay attention at the valve gasket posi- tioning ).
8.Put the assembled tank on the door along the valve direction.
9.Block the stopping elements in the in- verse order of unblock.
10.Insert again the BRITA MAXTRA car- tridge in the funnel .
How to use the BRITA MAXTRA filter cartridge
Step 1: Preparing the cartridge
To prepare your BRITA filter cartridge, please remove the protective wrapper (note: cartridge and inside wrapper may ap- pear moist, this is simply condensation). Immerse the cartridge in cold water and shake it gently to remove any air bubbles. The filter now is ready to use.
As required for some other water filter car- tridges, there is no need to
Step 2: Insert in the water tank
Remove the tank lid. Before inserting the cartridge, remove the funnel and clean it thoroughly by rising it and wiping it dry.
Then, thoroughly clean the inside of the wa- ter tank with a dump cloth and wipe it dry as well.
