20electrolux
The manufacturer declines all responsibility if the above safety precautions are not ob- served.
This appliance complies with the E.E.C. Di- rectives.
Rear spacers
You can find the two spacers in the bag with documentation.
Do these steps to install the spacers:
1.Release the screw.
2.Engage the spacer below the screw.
3.Turn the spacer to the right position.
4.Tighten again the screws.
Removing the shelf holders
Your appliance is equipped with shelf re- tainers that make it possible to secure the shelves during transportation.
To remove them proceed as follows:
1.Move the shelf holders in the direction of the arrow (A).
2.Raise the shelf from the rear and push it forward until it is freed (B).
3.Remove the retainers (C).
| 2 |
| 1 |
4 | 3 |
|
Levelling
When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front.
Door reversibility
Warning! Before carrying out any operations, remove the plug from the power socket.
Important! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.
To change the opening direction of the door, do these steps:
