Electrolux ER 6632 Maintenance and Cleaning

Before any maintenance or cleaning work is carried

out, DISCONNECT the appliance from the

ELECTRICITY supply.

Clean the inside and accessories with warm water

and bicarbonate of soda (5ml to 0.5 litre of water).

Rinse and dry thoroughly.

NEVER USE DETERGENTS, ABRASIVE

POWDERS, HIGHLYPERFUMED CLEANING

PRODUCTS OR WAX POLISHES, TO CLEAN THE

INTERIOR AS THESE WILLDAMAGE THE

SURFACE AND LEAVE ASTRONG SMELL.

Clean the drain hole of the water trough at regular

intervals and make sure that the drain hole is never

obstructed, so that the defrost water may flow freely.

Should the interior light fail to work, first switch off the

appliance and disconnect from the electricity supply,

then replace the bulb as follows, see figure.

Unscrew the light cover and then pull it outward

toward the middle of the cabinet. Unscrew the bulb

and replace it with a new 15 watt bulb (available from

your nearest Electrolux Service Centre).

Replace the light cover by sliding it into its original

position and replacing the screw.

When the appliance is not in use for long periods,

disconnect from the electricity supply, empty all foods

and clean the appliance, leaving the door ajar to

prevent unpleasant smells.

D731

Maintenance and Cleaning