Global Machinery Company RHD1500 instruction manual Power cord maintenance, Cleaning

2.Use a spatula or similar instrument to apply the grease into the gearbox cavity. Be careful not to scratch or otherwise damage the mechanism.

3.Replace the cover.

CAUTION. Do not over-tighten the cover (5) or overfill the gearbox with grease. If you run out of grease, or are not sure how to change the grease, please take your product to the nearest authorised service centre and have a qualified person replace the grease.

Power cord maintenance

If the supply cord needs replacing, the task must be carried out by the manufacturer, the manufacturer’s agent, or an authorised service centre in order to avoid a safety hazard.

Cleaning

1.Keep your machine and its cord clean. The outside of the machine can be cleaned using a damp soft cloth with a mild detergent if required.

2.Some maintenance products and solvents may damage the plastic parts; these include products containing benzene, trichloroethylene, chloride and ammonia.

3.Excessive sparking generally indicates the presence of dirt in the motor or abnormal wear on the carbon brushes.

4.Take special care to keep the ventilation inlets/outlets free from obstruction; cleaning with a soft brush will usually be sufficient to ensure acceptable internal cleanliness.

5.Wear eye protection when carrying out cleaning.

CAUTION. Do not use cleaning agents to clean the plastic parts of the drill.

11