Unpacking
Unpack the appliance and check that it is in good condition and free of any transport damage. Notify the dealer immediately of any damage. Hand the packaging over for recycling.
Do not allow children to play with the packaging. The plastic film can cause suffocation.
Removing the transport supports
Remove the tape and the transport supports from
·the door sides
·inside the door hinges
·the shelves
Remove the transport hinge.
Mounting the handle
The handle is included in the packaging material of the cabinet.
Secure the handle.
Cleaning
Wash the inside of the cabinet using lukewarm water, a mild
Installing the appliance
Make sure that the power plug is not squashed or damaged by back of the product.
·A damaged power plug may overheat and cause a fire.
Do not place heavy articles or the product itself on the power cord.
·there is a risk of a short circuit and fire.
If the power plug socket is loose, do not insert the power plug.
·there is a risk of electric shock or fire.
To obtain the best performance from the appliance, ensure :
·the appliance is placed in a dry, cool place and is not exposed to direct sunlight.
·the appliance is not placed close to a source of heat, e.g. a cooker or dishwasher.
·the appliance is level. The appliance should not lean
against any wall. If necessary adjust the feet using the adjustment spanner supplied.
·there is good air circulation around the appliance and that the air channels below and behind
the appliance are not blocked. The ventilation space above the appliance must be at least 4 cm.
The ventilation space can either be
a)directly above the appliance, or
b)behind and above the top cupboard. In this case, the space behind the cupboard must be at least 50 mm deep.
a) | b) | 50mm |
Electrolux 818 35
10