| electrolux e:line rangehood imprtant safety instructions/dimensions 2 |
Important safety instructions | Dimensions |
This manual explains the proper use of your new E:Line canopy rangehood. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference.
This canopy rangehood is a domestic appliance which has been manufactured and tested to comply with Australian and New Zealand Standard AS/NZS 60335.2.31.
caution
This symbol indicates the possibility of injury or damage to property
Meanings of symbols used in this manual are shown below:
This symbol indicates never to do this 
This symbol indicates always do this
caution
Canopy dimensions
290mm
900mm
320mm
Ø150mm
700mm
258mm
1350mm
(maximum)
100mm
Read the following carefully to avoid an electric shock or fire.
Young children should be supervised to ensure they do not play with the canopy rangehood.
The canopy rangehood is not intended for use by young children or infirm persons without supervision.
Ensure the canopy rangehood is switched off before carrying out maintenance, to avoid any possibility of electric shock.
Never carry out flambé cooking under the canopy rangehood. This canopy rangehood is not recommended for barbeques. This canopy rangehood cannot be installed for external use.
Grease filters must be removed every four weeks (maximum) for cleaning to reduce the risk of fire.
The exhaust from the canopy rangehood must not be discharged into any heating flue, which may carry combustion products from other sources. (Fig. 1)
Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when the canopy rangehood is used at the same time as appliances burning gas or other fuels.
Always cover lit gas burners with pots or pans when canopy rangehood is in use.
Always switch off gas burners before you remove pots or pans.
Do not leave lit gas burners exposed due to the risk of fire. (Fig. 2)
Electrical Connection
•Check that the mains voltage matches with the voltage on the data plate inside the canopy rangehood.
•Check that the installation complies with standards of local gas and electricity authorities.
•If the supply cord is damaged, it must be replaced by the manufacturer or its service agent of similarly qualified person in order ro avoid a hazard.
Fig. 1
500mm
Fig. 2
