Building in
Dimensions of the recess |
|
| |
|
| ERN 1673 | ERN 2372 |
Height of housing (1) | mm | 880 | 1225 |
Depth of housing (2) | mm | 550 | 550 |
Width of housing (3) | mm | 560 | 560 |
50
540
3
2 1
PR0
It is necessary that the cabinet has a ventilation recess with the following dimensions:
Depth 50 mm | Width 540 mm |
|
| 2 |
50 mm | min. | 200 cm |
| ||
|
| min. |
|
| 200 cm2 |
D526 |
|
|
For appropriate venting, follow indications in the figure.
1 |
2 |
D022 |
1.Fit the appliance in the niche by making sure that it stands against the interior surface of the unit on the side where the door hinges of the appliances are fitted. Insert the appliance until the upper strip butts up against the unit (1) and make sure that the lower hinge is in line with the surface of the unit (2).
D132
2.Press in the joint covers between the appliance and the kitchen furniture.
I |
3.Open the door and push the appliance against the side of kitchen furniture opposite to that of the appliance hinges. Fasten the appliance with 4 screws (I) provided in the kit included with the appliance.
14
