Door Reversibility
The appliance is supplied with the door opening to the right.
For door opening in the opposite direction, perform the following actions prior to installation
1.Unscrew the upper pin and remove the spacer
2.Remove the door.
3.Unscrew the lower pin and remove the spacer; replace them on the opposite side.
4.Reinsert the door and screw the pin and the spacer back in place on the opposite side.
Instructions for totally built-in appliances
Recess dimensions
Height | (1) | 1780 mm |
Depth | (2) | 550 mm |
Width | (3) | 560 mm |
The appliance’s door has been locked in position for transport by means of pins on both sides.
According to the door opening direction, remove relevant pins at the top and at the bottom.
To ensure adequate ventilation, allow the clearances shown in figure.
Furthermore, it is necessary that the cabinet has a ventilation recess with the following dimensions:
depth | 50 mm |
width | 540 mm |
50 mm | min. |
|
200 cm2 |
| |
|
| min. |
|
| 200 cm2 |
D567 |
|
|
| 50 |
|
| 540 |
|
| 3 |
|
| 2 | 1 |
PR0 |
|
|
14
