12electrolux
Do these steps to clean the filters:
1.Open the door.
2.Remove the basket.
3.Remove the filters in the bottom of the appliance.
4.Clean the filters below running water.
5.Put the filters back.
6.Turn the microfilter clockwise to lock it.
7.Close the door.
Cleaning the spray arm
Regularly examine the spray arm. Remove remaining food from the holes in the spray arm.
Do these steps to remove the spray arm:
1.Turn the nut anticlockwise.
2.Remove the spray arm.
3.Fully clean the holes.
External cleaning
Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloroethylene etc...).
Frost precautions
Caution! Do not install the appliance where the temperature is below 0 °C. The manufacturer is not responsible for damage because of frost.
If not possible, empty the appliance and close the door. Disconnect the water inlet hose and remove water from the water inlet hose.
Technical data
Dimensions
Electrical connection - Voltage - Overall power - Fuse
Water supply pressure
Capacity
Width cm |
| 54,5 |
Height cm |
| 44,7 |
Depth cm |
| |
|
|
|
Information on the electrical connection is given on the rating plate on the back of appliance.
Minimum |
| 0,8 bar (0,08 | MPa) |
Maximum |
| 10 bar (1,0 | MPa) |
Place settings |
|
| 6 |
|
|
|
|
What to do if…
The appliance does not start or stops during operation.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a sol-
ution to the problem yourself, contact the Service Force Centre.
