Activation/deactivation of the rinse aid dispenser
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously buttons 2 and 3, until the indicator lights of buttons 1, 2, and 3 start flashing.
3.Press button 2, the indicator lights of buttons 1 and 3 turn off while the indicator light of button 2 goes on flashing.
4.To activate the rinse aid dispenser, press button 2 again, the end of programme indicator light illuminates, indicating that the rinse aid dispenser has been activated.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
6.To deactivate the rinse aid dispenser again, follow the above instructions until the end of programme indicator light turns off.
daily use electrolux 23
If you decide to turn back to the use of standard detergent system we advise that you:
1.Deactivate the 3 in 1 function.
2.Fill up the salt container and the rinse aid dispenser again.
3.Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes.
4.Adjust the water hardness setting according to the hardness of the water in your area.
5.Adjust the rinse aid dosage.
