Using your appliance
Loading your appliance
Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance.
Do not load very small items which can fall through the baskets.
The cutlery basket can be placed either to the left or to the right of the lower basket.
UI50 |
UI47 |
The upper basket
The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses.
The lower basket
The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
Large dishes and lids should be arranged around the edge of the basket, ensuring that the upper spray arm can turn freely. The two rear rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls.
To lower the prongs:
-Slightly pull them upwards and let them drop down (see picture).
-To bring them back to the standing position, just pull them up again.
Arrange items on and underneath the cup racks so that water can reach all surfaces.
For taller items, the cup racks can be folded upwards.
Light items (plastic bowls etc.) should be loaded in the upper
basket and arranged so theyUS64 do not move.
In case that plates are loaded in the upper basket:
load them starting from the rear positions of the basket; tilting them slightly forwards and
UI43 |
UI44 |
avoiding the front positions near the door.
Before closing the door, ensure that the spray arms can rotate freely.
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 32 cm in diameter) you can load them in the lower basket after moving the upper basket to the higher position.
The cutlery basket
To move to the higher position proceed as follows:
Long bladed knives stored in an upright position are a potential hazard.
Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives.
Cutlery should be placed in the removable cutlery basket with the handles facing downwards.
If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards.
1.Move the front runner stops
(A)of the upper basket outward and slide the basket out.
2.Refit the basket in the higher position and replace the stops (A) in their original position.
A |
RC01 |
Mix spoons with other cutlery to prevent them from sticking together.
Silver cutlery tends to go black if mixed with steel cutlery. Place it in the cutlery basket separate from the others.
For best results we recommend to use the cutlery grid
provided (if the size and the dimensions of the cutlery allow it).
When the top basket is in
the higher position it will only take plates up to 20 cm in diameter and you will not be able to use the cup racks.
After loading your machine always close the door, as an open door can be a hazard.
9