Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a close fitting sink unit or a
570 | - |
| 600 |
820 |
|
600 |
|
IN05 |
|
Proceed as follows:
-Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.
Levelling
Good levelling is essential for correct closure and sealing of the door.
When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet.
If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
Protection against flooding
In order to prevent water floods, the machine has been provided with an additional device in the bottom of the machine to protect against flooding.
The device will operate if there are any water leaks in the machine, however it will only operate if the machine is on.
In case of malfunction to repair the dishwasher, turn off the water tap and call the Service Force Centre.
The products
In order to obtain a good wash, it is necessary to use detergents specially designed for dishwashers.
To ensure that your dishwasher functions perfectly, Zanussi recommends using Calgonit System, a unique and complete
product, tested by millions of householders. Calgonit System includes Calgonit detergent, rinse aid, salt,
machine detergent and
It is able to fulfil the main requirements for clearing both the crockery and the machine itself.
11
