Select and start a washing programme
Select the washing programme and delay start with the door slightly opened. The start of the programme or the countdown of the delay start will occur only after the closure of the door. Until that moment it is possible to modify the set made.
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate
2.Check that the water tap is opened
3.Press the On/Off button. The dishwasher must be in setting mode.
4.Press the button corresponding to the required programme (see "Washing programmes" chart). The indicator light corresponding to the selected programme will illuminate.
Close the dishwasher’s door, the programme starts automatically.
Setting and starting the programme with "delay start"
1.After having selected the washing programme, press the delay start button until the indicator light corresponding to the chosen hours flashes (3h, 6h, 9h).
2.Close the dishwasher’s door, the countdown starts automatically.
3.The countdown will decrease with steps of 3 hours.
4.The opening of the door will not modify or interrupt the countdown.
daily use electrolux 23
5.Once the delay start has elapsed the programme will start automatically.
The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically.
Cancelling the "delay start"
●To cancel a delay start in progress you have to reset the dishwasher.
●Press simultaneously and keep pressed the two programme buttons positioned over the writing Cancel, until all the programme button lights will illuminate.
●Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again.
