The furniture door
The door on this appliance is designed for the overlay of a panel having the following dimensions:
Width: | 596 mm |
Height: | 664 - 714 mm max |
Thickness: | 20 mm max |
Weight: | 2 - 7.5 kg max |
The panel height should be no more than indicated, otherwise complete opening of the door will no longer be possible as the panel hits against the dishwasher plinth.
Mounting the furniture door onto the door
The height of the panel depends on the height of adjacent kitchen units (see kitchen plinth adjustment).
The panel must be fitted with a handle, as the dishwasher handle will be hidden by the panel. Drill the panel with a Ø 2 x 12 bit according to the dimensions indicated in the figure.
Fix the cross bar onto the panel using four 3.5 x 16 screws provided. Reduce the length of fixing screw according to thickness of panel.
Mount the decor panel by inserting the two pivots of the
Once the correct position has been found, open the door and fasten the decor panel on the lower section by means of the two 4 x 40 screws provided, using the holes through the inner door.
| 596 max |
| |
|
| 172 | |
| 550 | 30 | |
* | * | ||
| |||
II19 |
|
|
= | 596 max | = |
546 | ||
40 |
| 40 |
30 |
| 30 |
II17 |
|
|
II12 |
II10 |
27 | PFI10UK |
