26electrolux daily use
Set and start a washing programme
1.Check that the baskets have been loaded correctly and that the spray arms are free to rotate
2.Check that the water tap is opened
3.Press the On/Off button.
4.Select the washing programme.
5.If required, postpone the start/end time of the washing programme.
6.Set, if required, available options.
7.Press the OK button and close the door, the washing programme will start automatically.
If the delay start has been set, the countdown will start automatically. Once the delay start has elapsed the programme will start automatically.
The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.
Once the washing programme has started, a
This optical signal will remain illuminated for all the duration of the washing programme.
If the appliance has been installed higher up with a furniture door mounted flush, the optical signal will be no longer visible.
Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Interrupt a washing programme in progress:
●Open the dishwasher door; the programme will stop. The message PLEASE CLOSE DOOR is displayed.
Close the dishwasher door; the programme will continue from the point at which it was interrupted.
Cancel a washing programme or a delay start in progress
●Open the dishwasher door.
●Press simultaneously both Option and OK buttons.
●The message CONFIRM CANCEL? is displayed.
●Press OK button to confirm.
●The appliance returns to setting mode and the message CHOOSE PROGRAMME is displayed.
If the delay start is cancelled, also the washing programme will be cancelled.
If a new washing programme will be set, check that there is detergent in the detergent dispenser.
