18electrolux
Rear spacers
In the bag with the documentation, there are two spacers which must be fitted as shown in the figure .
Slacken the screws and insert the spacer under the screw head, then re- tighten the screws.
PR153 |
Door reversibility
Before carrying out any operations, remove the plug from the power socket.
To change the opening direction of the door, proceed as follows:
•To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the door of the appliance during the operations.
•Open the door with the appliance in the upright position. Unscrew the screws and remove the upper door plastic trim.
•Remove the little plastic cover from the door plastic trim and refit on the opposite side (d).
• Lay the appliance onto it's back side.
b |
c |
a |
•Remove the screw of the hinge cover plug (a).
•Unscrew the upper hinge and remove it (b).
•Unscrew the screw and remove the door stopper (c).
•Remove the door.
