P0037

Unscrew and remove the filter.

Clean carefully under a fast running tap.

P0039

P0040

Warning

When the appliance is in use and depending on the programme selected there can be hot water in the filter. Never remove the filter during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the filter, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

The water inlet filters

If your water is very hard or contains traces of lime deposit, the water inlet filters may become clogged.

It is therefore a good idea to clean them from time to time.

Turn off the water taps. Unscrew the water inlet hoses. Clean the filters using a hard bristle brush.

Tighten up the inlet hoses.

P1090

The dangers of freezing

If the machine is exposed to temperatures below 0°C, certain precautions should be taken.

Turn off the water taps.

Unscrew the inlet hoses.

Unhook the drain hose from the rear support and position the end of this hose and that of the inlet hoses in a bowl. Run the draining programme.

Disconnect the appliance.

Screw the inlet hoses and reposition the drain hose.

When you intend to start the machine up again, make sure that the room temperature is above 0°C.

17

Page 17
Image 17
Electrolux EW 1000 I manual Water inlet filters