Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below.

IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

During machine operation it is possible that one of the following flashing alarm codes appears on the display:

-E10 : problem with the water supply

-E20 : problem with water draining

-E40 : door open

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local Service Force Centre.

Symptom	Possible causes

The machine does not start	●	The door has not been closed. (E40)
	●	The plug is not properly inserted in the power socket.
	●	There is no supply at the socket.
	●	The main fuse or the fuse in the plug has blown.
	●	The START/PAUSE button	has not been depressed.
	●	The DELAY START option	has been selected.

The machine does not fill	●	The water tap is closed. (E10)
	●	The filter in the inlet hose is blocked. (E10)
	●	The inlet hose may be squashed or kinked. (E10)
	●	The door has not been closed. (E40)

The machine fills then empties	●	The end of the drain hose is too low.
immediately	●	The end of the drain hose is submerged in water.
	●	There is no vent in the end of the drain hose.

The machine does not empty and/or	●	The drain hose may be squashed or kinked. (E20)
does not spin	●	The RINSE HOLD option has been selected.

●The drain filter may be blocked. (E20)

●The drain hose extension, if fitted, is not correct. Follow the instructions for connecting to the waste.

●The drainage system pipes are blocked.

●The wash load is unbalanced: redistribute the clothes inside the drum to allow the machine to spin.

There is water on the floor	●	Too much detergent or unsuitable detergent has been used (creates too
		much foam).
	●	Check whether there are any leaks from the inlet hose fittings. It is not
		always easy to see this as the water runs down the hose; check to see if
		it is damp.
	●	The drain hose may be damaged or not securely positioned.
	●	The detergent dispenser drawer or recess is clogged.
	●	The drainage system pipes are blocked.

Unsatisfactory washing results	●	Too little detergent or unsuitable detergent has been used. An
		insufficient amount of detergent leaves the laundry looking grey and
		causes lime scale to form.
	●	Stubborn stains have not been treated prior to washing
	●	The correct wash programme/temperature has not been selected.
	●	Too much laundry has been placed in the drum.

EW 1209 I specifications

The Electrolux EW 1209 I is a versatile and efficient washer dryer that caters to the modern consumer's laundry needs. This appliance is designed with cutting-edge technologies and features that ensure thorough cleaning, efficient drying, and user-friendly operation, making it an ideal choice for households of any size.

One of the standout features of the Electrolux EW 1209 I is its innovative ProSense technology. This intelligent system automatically adjusts the wash cycle time, water consumption, and energy use based on the size and type of load. This not only ensures optimal cleaning but also minimizes resource usage, offering a more environmentally friendly laundry solution.

The washer dryer boasts a large capacity, accommodating up to 9 kg of laundry in one wash cycle. This is particularly beneficial for larger families or those who frequently find themselves with significant laundry loads. The appliance operates on a range of wash programs, allowing users to select settings tailored to different fabric types, ensuring that delicate items receive gentle treatment while tougher fabrics benefit from a more intensive wash.

In terms of drying capabilities, the Electrolux EW 1209 I features a built-in heat pump technology. This allows the appliance to dry clothes at lower temperatures, which not only protects fabrics but also helps save on energy costs. The dryer operates efficiently and can handle up to 6 kg of laundry. Users will appreciate the flexibility of its various drying programs, including options for time-efficient drying and delicate care.

The appliance is also designed with user convenience in mind. The intuitive interface features a clear display and straightforward controls, making it easy for anyone to operate. Additionally, the delayed start function allows users to schedule laundry to begin at a more convenient time, such as during off-peak electricity hours.

Moreover, the Electrolux EW 1209 I is equipped with a variety of safety features, including child lock options and leak protection, providing peace of mind to households with young children. Its sleek and compact design makes it suitable for smaller living spaces, combining functionality with modern aesthetics.

In summary, the Electrolux EW 1209 I washer dryer is an impressive appliance that combines advanced technology with efficiency and ease of use. Its ProSense technology, generous capacity, heat pump drying, and user-friendly design make it a standout choice for anyone looking to streamline their laundry process while maintaining optimal fabric care.

Electrolux EW 1209 I manual Something Not Working

Models: EW 1209 I

Something Not Working

Symptom

Possible causes

The machine does not start

The machine does not fill

immediately

does not spin

There is water on the floor

much foam).

Unsatisfactory washing results

EW 1209 I specifications