Water inlet

Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance to connect to the water supply.

P1088

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be connected to a cold water supply.

A minimum water pressure of 50 kPa (0.5 bar) is required for safe operation of the appliance.

If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.

There should be a minimum distance of 5.02m (161/2 ft) between the appliance’s inlet and the bottom of the water storage tank.

Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.

P0021

Water drainage

This appliance is designed to be permanently plumbed into your home's water supply and drainage system.

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece” supplied.

(12")cm

30

P1074

The standpipe should have an internal diameter of approximately 38mm (see diagram) thus ensuring there is an air break between the drain hose and standpipe.

cm.(12")30Min.

38 mm.(1/2") diameter

standpipe

P1040

When discharging into a standpipe ensure that the top of the curve in the hose end is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level. The upright standpipe should have a minimum length of 30cm (12'') from the bottom of the elbow to the top of the pipe (see diagram).

Make sure that it is designed in such a way, that the end of the drain hose cannot be covered with water.

3 pin

 

90 cm.(35.4")

cm.

Max.

Min.60 (23.6")

P1039

 

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm.

27

Page 27
Image 27
Electrolux EW 1209 I manual Water inlet, Water drainage, Appliance must be connected to a cold water supply

EW 1209 I specifications

The Electrolux EW 1209 I is a versatile and efficient washer dryer that caters to the modern consumer's laundry needs. This appliance is designed with cutting-edge technologies and features that ensure thorough cleaning, efficient drying, and user-friendly operation, making it an ideal choice for households of any size.

One of the standout features of the Electrolux EW 1209 I is its innovative ProSense technology. This intelligent system automatically adjusts the wash cycle time, water consumption, and energy use based on the size and type of load. This not only ensures optimal cleaning but also minimizes resource usage, offering a more environmentally friendly laundry solution.

The washer dryer boasts a large capacity, accommodating up to 9 kg of laundry in one wash cycle. This is particularly beneficial for larger families or those who frequently find themselves with significant laundry loads. The appliance operates on a range of wash programs, allowing users to select settings tailored to different fabric types, ensuring that delicate items receive gentle treatment while tougher fabrics benefit from a more intensive wash.

In terms of drying capabilities, the Electrolux EW 1209 I features a built-in heat pump technology. This allows the appliance to dry clothes at lower temperatures, which not only protects fabrics but also helps save on energy costs. The dryer operates efficiently and can handle up to 6 kg of laundry. Users will appreciate the flexibility of its various drying programs, including options for time-efficient drying and delicate care.

The appliance is also designed with user convenience in mind. The intuitive interface features a clear display and straightforward controls, making it easy for anyone to operate. Additionally, the delayed start function allows users to schedule laundry to begin at a more convenient time, such as during off-peak electricity hours.

Moreover, the Electrolux EW 1209 I is equipped with a variety of safety features, including child lock options and leak protection, providing peace of mind to households with young children. Its sleek and compact design makes it suitable for smaller living spaces, combining functionality with modern aesthetics.

In summary, the Electrolux EW 1209 I washer dryer is an impressive appliance that combines advanced technology with efficiency and ease of use. Its ProSense technology, generous capacity, heat pump drying, and user-friendly design make it a standout choice for anyone looking to streamline their laundry process while maintaining optimal fabric care.