11 DELAY START button
This button makes it possible to delay the starting of the programme by up to 24 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears.
If the button SOAK has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes.
You must select this option after you have set the programme and before you press the START/PAUSE button.
The time value shown on the display will decrease by one unit every hour.
You can change the delay time at any moment, before you press the START/PAUSE button, then press the DELAY START button till the desired delay time appears in the display. At the end press the START/PAUSE button again.
If you have already pressed the START/PAUSE button, and you wish to cancel the delay time, proceed as follows:
•set the washing machine to PAUSE by pressing the START/PAUSE button;
•press the DELAY START button once, to erase the delay time. The display will indicate “0h’”.
•press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time.
If you need to open the door, you must first set the washing machine to PAUSE by pressing the START/PAUSE button. After you have closed the door, press the START/PAUSE button again.
12 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme will light up.
Prewash
Wash
Rinses
Spin
Drain
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
12
