Should it not be possible to open the door, and should it
be absolutely necessary to do so, switch the machine off
by pressing the ON/OFF button.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperatures of the
water in the washing machine!
When you close the door and press the ON/OFF button
again, the washing machine will resume the programme
from the point where it had been interrupted.
Programme information
40°-60° Mix
With this programme it is possible to wash coloureds
cotton items or mixed fabrics saving energy. To be used
for slightly soiled laundry.
Washing temperature: c.a. 40°C
Final spin speed: 1400 r.p.m.
60° - 40° (Daily)
This is a complete programme for washing laundry
which is lightly soiled or which needs freshening up in a
short time. To be used for cottonitems.
Washing temperature: 60°C - 40°C
Final spin speed: 1400 r.p.m.
Wool / Handwash
Washing programme for machine washable wool as
well as for hand washable woolens and delicate fabrics
with the “hand washing” care symbol.
Rinses
With this programme it is possible to rinse and spin
cotton garments which have been washed by hand.
The machine performs 3 rinses, followed by a final spin
at 1400 r.p.m.
The spin speed can be reduced by depressing “Spin
speed” button.
Drain
For emptying out the water of the last rinse in
programmes with the Rinse hold or Night Cycle
option.
Turn first the programme selector dial to Off, then select
programme “Drain” and depress the Start/Pause
button.
Spin
Separate long spin at the maximum speed for hand
washed cotton garments. You can reduce the speed by
means of “Spin speed” button to adapt it to the fabrics
to be spun.
Delicate Spin
Separate short spin at 700 rpm for hand washed
synthetics, delicate and wollen garments.
40°- (Easy iron)
With this programme the laundry is gently washed and
spun to avoid any creasing. In this way ironing is easier.
To be used for syntheticitems.
Washing temperature: 40°C
Final spin speed: 900 r.p.m.
Off = Reset/Cancelling
To reset a programme turn the selector dial to Off. Now
can a new programme be selected.
10
13294920.qxd 30/11/2005 11:22 Pagina 10 (Nero/Process Black pellicola)