12 DISPLAY

The display shows the following information:
Cancelling - Duration of the programme -
Delayed start - Incorrect option selection - Alarm
code - End of programme.
If a programme has been cancelled - programme
selector dial on position O- three flashing dashes
appear on the display.
Now you can select a new programme.
After selecting a programme, the duration is
displayed in hours and minutes ( for example 2.05).
The duration is calculated automatically on the basis of
the maximum recommended load for each type of fabric.
After the programme has started, the time remaining
is updated every minute.
The selected delay (24 hours max) set by means of
the relevant button appears on the display for 3
seconds, then the duration of the previously selected
programme is displayed.
Delayed start
2.05
Duration of the selected
programme
---
Cancelling
The countdown is updated every hour.
If an option which is not compatible with the set
wash programme is selected, the message Err is
displayed for 2 seconds.
In the event of operating problems, some alarm
codes can be displayed, for example E20 (see
paragraph “Something not working”).
When the programme has finished a flashing zero
is displayed.
End of programme
E20
Alarm codes
Incorrect option selection
12
132998580•gb.qxd 18-01-2001 8:57 Pagina 12