| Problem | Possible cause |
|
| |
| • Spinning starts late or the | • The electronic unbalance detection device has cut |
| laundry is not spun enough: | in because the laundry is not evenly distributed in |
| the drum. The laundry is redistributed by reverse | |
|
| |
|
| rotation of the drum. This may happen several |
|
| times before the unbalance disappears and normal |
|
| spinning can resume. If, after 6 minutes, the |
|
| laundry is still not evenly distributed in the drum, |
|
| the machine will spin at a lower speed. If at the end |
|
| of the programme the laundry is not spun enough, |
|
| redistribute the load manually and select the spin |
|
| programme. |
|
|
|
ENGLISH
Water is
not visible in the machine. The
machine, which is the result of modern
technology, runs in a very economical way with
low water consumption. Performance is
nevertheless excellent.
P1035UK |
If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information.
The machine makes an unusual noise.
The machine is fitted with a commutator motor which improves machine
performance.
P1034UK |
| Mod |
| Prod. No |
P0042 BD | Ser. No |
|
25
