electrolux 7

Measure out the detergent and the fab- ric softener

Pull out the dispenser drawer until it stops. Measure out the amount of detergent re- quired, pour it into the main wash compart- ment or in the appropriate compartment if the selected programme/option it requires (see more details in «Detergent dispenser drawer»).

If required, pour fabric softener into the com- partment marked (the amount used must not exceed the «MAX» mark in the drawer). Close the drawer gently.

Select the required programme by turning the programme selector dial (1)

Turn the programme selector dial to the re- quired programme. The washing machine will automatically select the maximum spin value provided for the programme you have chosen. You can change this value by press- ing the corresponding button. The green pi- lot light of the button 5 starts to flash.

The selector dial can be turned either clock- wise or counterclockwise. Turn to position

«O » to reset programme/Switching the ma- chine off.

At the end of the programme the selec- tor dial must be turned to position O, to switch the machine off.

Caution! If you turn the programme selector dial to another programme when the machine is working, the red pilot light of button 5 will blink 3 times to indicate a wrong selection. The machine will not perform the new selected programme.

Reduce the spin speed by pressing button 2

By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.

Press button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant light illumi- nates.

Page 7
Image 7
Electrolux EWP 10075 W user manual Measure out the detergent and the fab- ric softener