Prior to Using for the First Time
1.Set the water softener
2.Fill up with dishwasher salt
3.Fill up with rinse aid
3 If you wish to use 3in1 detergent, do the following:
–First read the section “Using 3in1 detergents”.
–Switch on the dishwasher, press 3in1 button. The button indicator lights up: 3in1 function is selected. As a result
–there is no need to fill up with dishwasher salt or rinse aid.
–there is no need to set the water softener.
–there is no need to activate/deactivate the rinse aid dispenser.
–Before the start of the dishwashing cycle put 3in1 detergent in the detergent dispenser.
Setting the Water Softener
The water softener must be set manually and electronically:
3 To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hardness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.
The dishwasher must be switched off.
Setting manually:
1.Open the dishwasher door.
2.Remove the lower basket from the dishwasher.
3.Turn water hardness dial on the left wall of the dishwasher interior to O or 1 (see table).
Setting electronically:
1.Press the ON/OFF button.
3 If indicators for the programme buttons are lit, a dishwashing cycle is activated. The cycle must be deactivated:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds. All additional wash programme button indicators will go out.
7