Electrolux FAVORIT 42300 To adjust the water softener, Filling with special salt, To fill

To adjust the water softener

With a screwdriver turn the selector on the upper front corner of the machine until the level required corresponds with the marker.

3	4
	5
	1
AA05

Filling with special salt

Caution! The packaging of dishwasher salt and detergents are often very similar. The accidental filling of the salt compartment with detergent would ruin the water softener. Each time you add salt, make sure the carton you have in your hand really is salt.

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting one of the washing programmes. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine for any period of time, which may cause corrosion.

To fill:

1.To fill with salt, unscrew the cap of the salt container.

2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time).

3.Using the funnel provided, pour in the salt until the container is full.

Do not worry if water overflows from the unit when filling with salt, this is quite normal.

SALET

SAL

SALZ

SEL

SR14

4. Replace the cap making sure that there is

no trace of salt on the screw thread or on the gasket.

5. Screw on the cap tightly.

9