Operating Instructions
29
Interrupting the programme by opening the dishwasher door
1 Hot steam may escape when the door is opened. There is a risk of scald-
ing. Open the door carefully.
0 1. Open the door of the dishwasher.
The programme will stop.
2. Close the door.
The programme will continue.
Cancelling the programme (RESET)
0 1. Press the function buttons 2and 3 simultaneously and keep them
pressed.
The programme display for the current programme will flash for several
seconds and then go out.
2. Release the function buttons.
The programme has been cancelled.
3 Turning off the dishwasher will only interrupt a selected programme,
not cancel it. The programme will restart after turning the dishwasher
back on again.
Setting or changing the start delay
Using the start delay timer you can adjust when within the next 19
hours the programme is to begin.
Setting the start delay:
0 1. Press the ON/OFF button.
2. Continue pressing the DELAY TIMER button buntil the number of
hours until the start of the programme is flashing in the multi-display.
3. Press the button for the desired programme.
The length of the selected programme will flash for a moment in the
multi-display, and then it will display the selected starting time again.
As soon as the number of hours is displayed without flashing, the start
delay has been activated.
The programme will start automatically following a countdown of the
hours set.
Changing the start delay:
As long as the programme has not started, you can still change the
start delay set by pressing the DELAY TIMER button until the desired
start delay is shown in the multi-display.