Operating Instructions
27
0 1.Open the door of the dishwasher. The wash programme stops.
2. Shut the door. The wash programme continues.
Cancelling the wash programme
0 1.Press the button for the wash programme in progress and keep it
pressed. The programme indicator for the wash programme in progress
flashes for a few seconds and then goes out.
2. Release the programme button, the wash programme is stopped.
Pause Function
The wash programme can be interrupted for a short period by using the
Pause function:
0 1.Press the ON/OFF button. The wash programme stops.
2. All indicators go out.
3. If after a short period the wash programme is to be continued, press
the ON/OFF button again. The wash programme continues.
2 The wash programme should not be interrupted for an extended period
of time, as otherwise the wash water will cool down and need to be
reheated thus increasing the electricity consumption.
Setting or Changing the Delay Start Timer
Using the delay start timer you can:
1. Press the ON/OFF button.
2. Press the DELAY TIMER button until the required delay (inhours) is
flashing on the multi-display.
3. Press the button for the desired wash programme. The multi-display
now displays the number of hours until the wash programme starts.
4. The wash programme starts automatically at the end of the time delay
set.
Changing the delay start:
As long as the wash programme has not started, you can change the
delay start set by pressing the DELAY TIMER button.