Electrolux FAVORIT 86070i manual What to do if, Remedying small malfunctions

What to do if...

Remedying small malfunctions

If the acoustic signal is activated, warning tones sound if there are faults.

If one of the following fault codes is displayed in the multi-display dur- ing operation:

–Fault codeÅ 10 (Problems with water inlet),

–Fault codeÅ 20 (Problems with water drainage), please have a look at the following table.

When the fault is remedied, press the button for the cycle that has started. The cycle will continue.

With other fault codes (“Å ” followed by a number):

–Abort the dishwashing cycle.

–Switch the appliance off and on again.

–Re-set the dishwashing cycle.

If the fault is displayed again, please contact the Customer Care De- partment and inform them of the fault code.

Malfunction	Possible cause	Remedy
	Water tap is blocked with	Check the water tap and
	limescale or faulty.	have it repaired if necessary.
1 short warning tone,	The tap is turned off.	Turn the tap on.
continuously repeated,	The filter (where present) in	Clean the filter in the
can be heard,
the cycle indicator for the	the threaded hose fitting	threaded hose fitting.
	on the tap is blocked.
selected dishwashing cycle
is flashing:		Cancel the dishwashing cy-
the WATER control indi-		cle (see chapter: Starting a
cator lights up:	Filters in the base of the	dishwashing cycle),
fault code Å 10 is dis-	dishwasher compartment	clean filters (see chapter:
played in the multi-dis-	are blocked.	Cleaning the filters),
play:		then start the dishwashing
(Problems with water in-		cycle again.
let)	Water inlet hose
		Check the position of the
	has not been correctly posi-
		hose.
	tioned.

30