Manuals / Electrolux / Kitchen Appliance / Dishwasher

Electrolux FAVORIT 88010 user manual Setting manually, Setting electronically, Setting Mmol/l

Models: FAVORIT 88010

1 44

Download 44 pages 19.69 Kb

Page 13

					Set the water softener				13


		Water hardness			Adjusting the water hardness		Use of salt
					setting

	°dH	°TH		mmol/l	manually	electronically

	11 - 14	19 - 25		1,9 - 2,5	1	level 3	yes
	4 - 10	7 - 18		0,7 - 1,8	1	level 2	yes
	< 4	< 7		< 0,7	1	level 1	no

The water softener must be set in both ways: manually, using the water hardness dial and electronically.

Setting manually

The dishwasher is factory set at position 2.

1. Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the water hardness dial to posi- tion 1 or 2 (see table).

4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at level 5.

Enter Option menu - SETTINGS - WATER HARDNESS .

Using the up and down scrolling buttons set the level of the water softener ac- cording to the hardness of the water in your area (see chart).

Image 13

Electrolux FAVORIT 88010 Setting manually, Setting electronically, Dishwasher is factory set at level, Setting Mmol/l

Contents

Favorit 88010 Dear Customer Contents Installation instructions Correct use Safety informationChild safety General safetyInstallation Safety informationProduct description Up and down scrolling buttons Control panelSymbols indicate the options see chart How to set the optionsSymbols have the following meaning DisplayOption menu Option submenu Press OK / Start to confirm and enter submenuSwitching on for the first time setting the language Reset buttonOK / Start button Set the water softener First useFill the rinse aid dispenser Set the Multi-tab function see Multi-tab functionSetting electronically Setting manuallySetting Mmol/l Dishwasher is factory set at levelTo fill Use of dishwasher saltOnly use branded rinse aid for dishwashers Use of rinse aidOpen the container by pressing the release button a By maxDaily use Adjusting the dosage of rinse aidLoading cutlery and dishes Open the door and slide out the baskets to load the dishes Cutlery basket Lower basketCutlery basket can be opened out If necessary, the beer glass holders can be fol- ded up Beer glasses and champagne glassesUpper basket Spikes folded away more room for serv- ing dishes Adjusting the height of the upper basketMaximum height of the dishes Upper basket Lower basket Raising / lowering the upper basket Use of detergentFill with detergent This detergent will take effect during the prewash phaseClose the lid and press until it locks in place Multi-Tab function Multi-Tab functionProgramme description Degree TypePrewash Main wash Final rinse DryingAny Select and start a washing programmeInterrupt a washing programme in progress Cancel a delay start or a washing programme in progressEnd of the washing programme Cleaning the filters Care and cleaningUnloading the dishwasher Clean all filters thoroughly under run- ning water Cleaning the spray armsInternal cleaning External cleaningFrost precautions Prolonged periods of non-operationWhat to do if Display message and malfunction Possible cause and solutionDisplay message and malfunction What to do ifWash results are not satisfactory Technical dataHints for test institutes Full load 12 standard place settingsExample loading arrangements Fixing to the adjacent units InstallationLevelling Water supply connections Water inlet hose with safety valveEnd of the drain hose can be connected in the following ways Water outlet hose connectionEnvironment concerns Electrical connectionThis could constitute a fire hazard through overheating Packaging material Page Page Subject to change without notice