4. DEFROSTING & CLEANING
3.
Open the drainage plug at the bottom, inside the cabinet.
Keep a suitable container under the drain hose to collect the defrost water (fig. 14).
6.
Allow the cleaned parts to dry completely.
7.
Fig 14. |
4. |
Keep the lid open and allow the frost to melt |
completely. |
Never use any heat source other than hot water to speed up defrosting.
Never use any
5.
Clean the appliance carefully as below,
a)Wash all parts inside the cabinet with warm water and mild detergent.
b)Clean the lid and the lid seal (gasket) similarly. After the rubber seal (gasket) is wiped and dried, it should be rubbed with unscented talcum powder (or French chalk) specially on the hinge side.
c)Clean the outside of the appliance, also with warm water and mild detergent.
Reset the drain plug at its position at the bottom.
8.
Close the lid. Connect the power supply plug to the wall socket.
9.
Allow the appliance to run and observe the cabinet temperature on the thermometer.
10.
Put back the vaccines into the appliance from the temporary storage, only when the appliance has attained safe recommended temperature range for storage of the vaccines.
11
