8electrolux
5.Install the lamp cover.
6.Tighten the screw to the lamp cover.
7.Connect the mains plug to the mains socket.
8.Open the door. Make sure that the lamp comes on.
Closing the door
1.Clean the door gaskets.
2.If necessary, adjust the door. Refer to "In- stallation".
3.If necessary, replace the defective door gaskets. Contact the Service Center.
Technical data
Dimension of the recess
Height
Width
Depth
The technical information are situated in the rating plate on the internal left side of the ap- pliance and in the energy label.
1225 mm
560mm
550mm
Installation
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance:
Climate |
| Ambient temperature |
class |
|
|
SN |
| +10°C to + 32°C |
N |
| +16°C to + 32°C |
ST |
| +16°C to + 38°C |
T |
| +16°C to + 43°C |
|
|
|
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate cor- respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact
