Electrolux FI2590FA Door reversibility, Ventilation requirements, Installing the appliance

Models: FI2590FA

1 16
Download 16 pages 25.49 Kb
Page 9
Image 9
Door reversibility

for this purpose. If the domestic power sup- ply socket is not earthed, connect the appli- ance to a separate earth in compliance with current regulations, consulting a qualified electrician.

The manufacturer declines all responsibility if the above safety precautions are not ob- served.

This appliance complies with the E.E.C. Di- rectives.

Door reversibility

The door of the appliance opens to the right. If you want to open the door to the left, follow these steps before you install the appliance:

1.Loosen and remove the upper pin.

2.Remove the door.

3.Remove the spacer.

4.With a key, loosen the lower pin.

electrolux 9

Ventilation requirements

The airflow behind the appliance must be sufficient.

min.

Ventilation requirements 200 cm2

min.

200 cm2

On the opposite side:

1.Tighten the lower pin.

2.Install the spacer.

3.Install the door.

4.Tighten the upper pin.

Installing the appliance

Installing the appliance Caution! Make sure that the mains cable can move freely.

Do the following steps:

1.Install the appliance in the niche.

Push the appliance in the direction of the arrows (1) until the upper gap cover stops against the kitchen furniture. Make sure that the distance between the ap- pliance and the cupboard front-edge is 44 mm.

Push the appliance in the direction of the arrows (2) against the cupboard on the opposite side of the hinge. Make sure that the clearance between the appli- ance and the cupboard is 4 mm.

Page 9
Image 9
Electrolux FI2590FA user manual Door reversibility, Ventilation requirements, Installing the appliance