Care & Cleaning (continued)

Wear gloves when replacing light bulbs to avoid getting cut.

REPLACING LIGHT BULBS

1.Unplug refrigerator.

2.Wear gloves as protection against possible broken glass.

3.Remove light cover, if necessary.

4.Unscrew and replace old bulb with an appliance bulb of the same type and wattage.

5.Replace light cover, if necessary.

6.Remember to plug the refrigerator back in.

Light Socket

Located Behind

Left Rear

of Crispers

Refrigerator Light Replacement

Crisper Light

Cover

or

Light Bulb

 

Crisper Light Replacement (Models may vary)

Freezer Light Replacement

 

 

Vacation and Moving Tips

 

 

 

 

 

Leave refrigerator operating during vacations of 3 weeks or less.

Short

 

Use all perishable items from refrigerator compartment.

Vacations

 

Turn automatic ice maker off and empty ice bucket, even if you will only be

 

 

gone for a few days.

 

 

 

 

 

Remove all food and ice if you will be gone one month or more.

 

 

Turn controls to "O" ( the OFF position) and disconnect power.

Long

 

Turn off automatic ice maker and turn water supply valve to closed position.

Vacations

 

Clean interior thoroughly.

 

 

Leave both doors open to prevent odors and mold build-up. Block doors open if

 

 

necessary.

 

 

 

 

 

Remove all food and ice.

Moving

 

If using handcart, load from side.

 

Adjust rollers all the way up to protect them during sliding or moving.

 

 

 

 

Pad cabinet to avoid scratching surface.

 

 

 

IMPORTANT: If the refrigerator is going to be stored or moved in freezing temperatures, the water in the ice and water system must be drained completely. Failure to do so could result in water leaks when the refrigerator is put back into service. Contact a service representative to perform this operation.

18

Page 18
Image 18
Electrolux - Gibson 241512200 manual Replacing Light Bulbs