Electrolux HD 8820, HD 8890, DD 8820 installation instructions What to do if

What to do if

If your appliance fails to work properly please carry out the following checks.

Symptom	Solution
The cooker hood will not start...	Check that:
	The hood is connected to
	the electricity supply.
	Check that a fan speed has
	been selected
The cooker hood is not working	Check that:
effectively..	The fan speed is set high
	enough for the task.
	The grease filters are clean.
	The kitchen is adequately vented
	to allow the entry of fresh air.
	If set up for recirculation, check
	that the charcoal filter is still
	effective.
	If set up for extraction, check that
	the ducting and outlets are not
	blocked.
The cooker hood has	The safety cut-out device has been
switched off during operation...	tripped.
	Turn off the hob and then wait for
	the device to reset.
	If the hood has been installed
	below the heights indicated in the
	installation instructions the motor
	will cut-out frequently which will
	damage the hood.

If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

62