Charcoal filter
•The charcoal filter should only be used if you want to use the hood in the recirculation function.
•To do this you will need an original AEG charcoal filter (available from your local Service Force Centre).
•The charcoal filter cannot be washed nor regenerated.
The charcoal filter should be replaced every 12 months under normal use.
Replacement filters are available from your local Service Force Centre.
Fitting
Remove the cover by rotating the knobs to 90°, put the charcoal filter inside and fix it by rotating the knob to 90° then close the cover. Fig. 5.
•To remove proceed in the reverse order.
•Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the registration plate located on the inside of the unit.
•The charcoal filter can be ordered from your local AEG Service Force Centre.
knobs
charcoal filter
90°
cover | Fig. 5 |
55
