Electrolux JLBIDW1200 - page 25

The wash results are not satisfactory

The dishes are not clean • The wrong programme has been selected.

• The dishes are arranged in such a way as to stop water

reaching all parts of the surface. The baskets must not

be overloaded.

• The spray arms do not rotate freely due to incorrect

arrangement of the load.

• The filters in the base of the washing compartment are

dirty or incorrectly positioned.

• Too little or no detergent has been used.

• Where there are limescales deposits on the dishes; the

salt container is empty or the incorrect level of the water

softener has been set.

• The drain hose connection is not correct.

• The salt container cap is not properly closed.

The dishes are wet and dull • Rinse aid was not used.

• The rinse aid dispenser is empty.

There are streaks, milky spots or a

bluish coating on glasses and dishes

• Decrease rinse aid dosage.

Water drops have dried onto

glasses and dishes

• Increase rinse aid dosage.

• The detergent may be the cause. Contact the detergent

manufacturer’s consumer care line.

25

Contents

Main Important safety information Installation Child safety Correct use General safety Maintenance and cleaning Service Ecological hints Environmental information Contents For the user Guide to use the instruction manual Description of the appliance Optical signal The control panel Indicator lights The digital display Function buttons (A, B, C, D and E) Setting mode Audible signals Washing programmes When the dishwasher is first installed The water softener Setting the water softener Setting manually Setting electronically Filling with dishwasher salt Filling with rinse aid Adjusting the rinse aid dosage Daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Fill with detergent Page Multi tab function Activation/deactivation of the Multi tab function Activation/deactivation of the rinse aid dispenser Select and start a washing programme Setting and starting the programme with delay start Cancelling a delay start or a washing programme in progress Interrupt a washing programme in progress End of the washing programme Unloading the dishwasher Maintenance and cleaning Cleaning the filters External cleaning Internal cleaning Prolonged periods of non- operation Something not working Page Page Technical data Installation Unpacking Fixing to the adjacent units Levelling Water connections Water inlet connection Water drain connection Page Electrical connection Repairs - After sales service Spare parts