Electrolux JLLFW 1805 instruction manual Maintenance and Cleaning, Ntila Tio Grill

Maintenance and Cleaning

You must disconnect the a ppliance f rom t he electr icity

supply, bef ore

ca r r

ying out a ny

cleaning

or

ma intenance

wo r k .

Removing

the

ve

ntila

tio

n

grill

The

ventila tion

g r ill

ca

n b

e removed, e

.g .

t

o wa

sh

t he

g r

ill.

M a ke sure the door is open when removing the

ventilation gr

ill.

U nsnap

the

upperdg ofe t he

gr

ill

by

pulling outwa

rd/

downwa

rd. Then pull t he

g

r

ill

str a

ig

ht

out

t o completely remove it.

Cl eani n g

Clean the freezer at regular intervals. Don't use detergents, abrasive powders, high perfumed cleaning products, wax polishes or cleaning products containing bleach or alcohol when cleaning the product

Disconnect the appliance from electricity supply. Clean the inside and accossories with warm water and bicarbonate of soda (5ml to 0,5 litre water).

Be careful when cleaning the inside of the fridge, due to fragile edges.

Rinse and dry thoroughly.

Regularly check the door seals and wipe clean to ensure they are clean and free from debris.

Wash the inside of the fridge using lukewarm water, a mild washing-up detergent and a soft cloth.

Wash the outer fridge with warm soapy water. Remove the ventilation grill (see above) and vacuum-clean under the fridge. Once or twice a year dust the condenser (grill) and the compressor at the back of the appliance, with a brush or vacuum cleaner, as an accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.

When moving the fridge, lift it by the front edge to avoid scratching the floor.

Defrosting the fridge

The fridge is defrosted automatically every time the compressor stops. Frost formation can be prevented by:

Dnot putting warm foodstuff inside the fridge.

Davoiding frequently opening the door or keeping it open too long.

To change the light bulb

This fridge is fitted with a clear halogen light bulb. The light is switched on automatically when the door is opened. If the bulb fails and needs to be replaced; disconnect the power from the fridge.

Cut the packaging containing the new bulb.

Keep the packaging on to hold the bulb when setting it into the socket. Do not touch the bulb with your bare fingers. Halogen light bulbs are sensitive to grease from the skin.

G4UV-blocked

20W/12V Low pressure

When the appliance is not in use

Disconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells.

If the fridge will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.

16