What to do, if...
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
Before contacting your local Service Force Centre, please carry out the checks listed below.
26
Malfunction
...the programme does not start
...the machine does not fill with water
...the machine will not drain
...the machine is noisy
...the door is difficult to close
Possible cause
The door is not properly closed.
The plug is not properly inserted in the power socket.
There is a power failure.
The water tap is closed.
The mains water supply has been cut off.
The inlet hose may be squashed or bent.
The inlet hose may be blocked.
The drain hose may be squashed or bent. The drain hose extension is not correct.
The sink may be blocked.
Dishes are rattling against each other.
The spray arms are knocking against the dishes.
The dishwasher is not level, or not installed correctly.
Remedy
Shut the door.
Insert the plug.
Check the fuse.
Open the water tap.
Wait for the supply to be restored.
Reposition the hose correctly.
Switch off the water supply and clean the filter.
Reposition the drain hose correctly. Follow the instructions for connecting to the waste.
Clear any blockages.
Load correctly crockery, cutlery, pots and pans. Refer to "Loading cutlery and dishes"
Refer to "Installation" instructions.
