Door and rubber collar
Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.
Clean the glass in the door and the rubber collar regularly.
What to do if...
Remedying small faults yourself
If during use of the appliance one of the following error codes is shown in the
–E10 (Problems with the water inflow),
–E20 (Problems with the water outflow),
–E40 (door open),
please consult the following table.
After the error has been remedied, press the START/PAUSE button.
In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE button.
If the error appears again, please contact your local Service Force Cen- tre, stating the error code.
Problem | Possible cause | Remedy | |
| Power plug not plugged in | Connect the plug to a mains | |
| or problem with the fuse. | socket. Check the fuse. | |
Washing machine does | The door is not shut proper- | Close the door until the lock | |
ly. | audibly clicks into place. | ||
not work. | |||
|
| ||
| The START/PAUSE button | Press the START/PAUSE but- | |
| was not pressed for long | ton for a longer period of | |
| enough. | time. | |
|
|
| |
The door cannot be | The child safety device is ac- | Deactivate the child safety | |
closed. | tivated. | device: | |
When you press a but- | The selected function can- | Select another function. | |
ton Err appears in the | not be used together with | ||
the wash programme set. |
| ||
E40 appears. |
|
| |
The END indicator is | The door is not closed prop- | Close the door properly. Re- | |
flashing 4 times, and si- | |||
multaneously an acous- | erly. | start the programme. | |
tic signal is sounding 4 |
|
| |
times. |
|
| |
|
|
|
19
