Electrolux LAVAMAT 74700 What to do if, Door and rubber collar, Remedying small faults yourself

Door and rubber collar

Regularly check whether deposits or foreign bodies are present in the folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

What to do if...

Remedying small faults yourself

If during use of the appliance one of the following error codes is shown in the multi-display:

–E10 (Problems with the water inflow),

–E20 (Problems with the water outflow),

–E40 (door open),

please consult the following table.

After the error has been remedied, press the START/PAUSE button.

In the event of other errors (E and a number or letter): Switch the ap- pliance off and then on again. Set the programme again. Press the START/PAUSE button.

If the error appears again, please contact your local Service Force Cen- tre, stating the error code.

Problem	Possible cause	Remedy
	Power plug not plugged in	Connect the plug to a mains
	or problem with the fuse.	socket. Check the fuse.
Washing machine does	The door is not shut proper-	Close the door until the lock
	ly.	audibly clicks into place.
not work.
	The START/PAUSE button	Press the START/PAUSE but-
	was not pressed for long	ton for a longer period of
	enough.	time.
The door cannot be	The child safety device is ac-	Deactivate the child safety
closed.	tivated.	device:
When you press a but-	The selected function can-	Select another function.
ton Err appears in the	not be used together with
multi-display.	the wash programme set.
E40 appears.
The END indicator is	The door is not closed prop-	Close the door properly. Re-
flashing 4 times, and si-
multaneously an acous-	erly.	start the programme.
tic signal is sounding 4
times.

19