![](/images/new-backgrounds/1061739/6173911x1.webp)
Instructions for the Installer
This hob must be installed by qualified personnel to the relevant British Standards.
Any gas installation must be carried out by a registered CORGI installer.
The manufacturer will not accept liability, should the above instructions or any of the other safety instructions incorporated in this book be ignored.
Engineers technical data
Overall dimensions | Cut out dimensions | ||
Width: | 580 mm. | Width: | 550 mm. |
Depth: | 500 mm. | Depth: | 470 mm. |
Supply connections
Gas: RC 1/2 inch (1/2 inch male) Rear right hand corner
Electric: 230 V ~ 50 Hz supply, 3 core flexible cable with non rewireable plug fitted with a 3 amp cartridge fuse.
Rear Left Burner
Heat Input | 2.0 kW (6824 | BTU/HR) |
Front Left Burner (rapid) |
| |
Heat Input | 3.0 kW (10236 | BTU/HR) |
2.8kW L.P.G. (9554 BTU/HR)
Rear Right Burner
Heat Input | 2.0 kW (6824 BTU/HR) |
Front Right Burner (auxiliary) | |
Heat Input | 1.0 kW (3412 BTU/HR) |
APPLIANCE CLASS: 3
APPLIANCE CATEGORY: II 2H3+
APPLIANCE GAS SUPPLY:
Natural gas G20 (2H) / 20mbar
Burner | Dia. Tap |
| 1/100 mm |
Auxiliary | 28 |
32 | |
Rapid | 40 |
Aeration adjustment none
6
I | ll | i |