Electrolux MT21 manual Fault Finding Chart Automatic Line Feed only, Maintenance

Are you using the trimmer cor- rectly?

Is the line jamming on the spool?

6

Fault Finding Chart (Automatic Line Feed only)

WARNING Disconnect from the mains electricity supply before attempting any maintenance or adjustment.

FAULT

LINE NOT FEEDING

OR

LINE TOO SHORT

OR

TRIMMER VIBRATES

CONTINUOUS

CLATTERING NOISE

LINE SNAPS CONTINUOUSLY

IF NONE OF THE ABOVE

OR IF FAULT PERSISTS

CHECK		ACTION
Is the automatic line feed work-
	No	Manually feed out line.
ing?
Is the line fed out and visible?
		Remove cap and spool, free line
Has line been removed from	No
		and re-fit spool and cap.
cleat?
		The line may be jammed on the
	No
Is the manual line feed working?		spool. Rewind line to remove
		crossed loops. Check that line is
Has the motor reached full		in correct section of spool.
	No	Allow the motor to reach full speed
speed before use?		before use
Has too much line been fed out?	Yes	Rewind line.
Is the line cutter missing from		Contact your local approved Service
	Yes
		Centre or Electrolux Outdoor
the safety guard?
		Products Customer Service.

? Only use tip of nylon line to trim.

Rewind the line on the spool, if Yes symptoms still persist, change

spool and line.

Contact Electrolux Outdoor Products Customer Service

Telephone : 01325 300303

	Maintenance
After you have finished using your trimmer follow the		S
procedure below:
1.	Disconnect from the mains electricity supply.
2.	Never clean your trimmer with water, cleaning flu-
	ids, or solvents, just remove debris with a suitable
	tool, a soft brush or dry cloth.
3.	Using a soft brush, clean around the inside of the
	safety guard, the cutting head and the motor
	housing air vents. (Fig S, T).
4.	Inspect the trimmer carefully, especially the parts
	of the cutting head.
5.	If your trimmer is damaged in any way contact	T
	your local Electrolux Outdoor Products approved
	service centre.

•Never use a damaged trimmer.

6.Wind cable carefully to avoid kinking.

7.Store in a cool, dry place and out of reach of chil-

dren.

Environmental Information

Electrolux Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, accord- ing to company procedures, and with the potential for recycling at the end of the products’ life.

•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.

•Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

•If necessary, contact your local authority for disposal information.

Service Recommendations

•Your product is uniquely identified by a silver and black product rating label.

•We strongly recommend that your product is serviced at least every twelve months, more often in a pro- fessional application.