Electrolux N 6 18 40 I Starting up and temperature regulation, Setting “0” Off

Models: N 6 18 40 I

1 14
Download 14 pages 6.72 Kb
Page 7
Image 7
Starting up and temperature regulation

Apply covers (B) into the relevant holes.

Separate parts A, B, C, D as shown in the figure

Place guide (A) on the inside part of the furniture door, in the upper and lower positions as shown in the fig- ure and mark the position of external holes. Having drilled the holes, fix the guide with the screws supplied.

 

B

D726

 

A

B

C

 

 

D

PR266

 

50mm

A

PR166

 

Starting up and temperature regulation

Wash the inside of the appliance with lukewarm water with a little bicar- bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter- gent as the smell may linger. Dry the appliance thoroughly.

When the refrigerator compartment door is opened, the internal lighting is switched on. The temperature control knob is located on the right hand side of the refrigerator compartment.

Setting “0”: Off.

Setting “1”: Hightest temperature, (warmest setting).

Setting “6” (end-stop) :Lowest temperature, (coldest setting).

The exact setting should be chosen keeping in mind that the temperature inside the refrigerator depends on:

-the quantity of food stored

-how often the door is opened

The temperatures in the refrigerator compartment and freezer compart- ment cannot be independently regulated.

If you want to freeze fresh food rapidly, select setting “6”, ensuring that the temperature in the refrigerator compartment does not drop below 0°C. You should reset the temperature control knob to setting “3” or “4”, if this does occur.

As soon as the fresh food placed in the freezer has frozen, return the tem- perature control knob to “3” or “4”.

Important!

High ambient temperatures (e.g. on hot summer days) and a cold setting on the temperature regulator (position"5" to "6") can cause the compressor to run continuously.

If this happens, turn the temperature regulator back to a warmer setting (position "3" to "4"). At this setting the compressor will be switched on and off as usual and automatic defrosting recommenced.

Ambient Temperature switch

With a room temperature below

 

+16°C the Fridge freezer may not

 

function correctly. If the room tem-

 

perature is lower than +16°C it will

A

be necessary to depress switch (A).

 

The relevant pilot light comes on.

D710

22

7

Page 7
Image 7
Electrolux N 6 18 40 I Starting up and temperature regulation, Setting “0” Off, Ambient Temperature switch