Interior Accessories
Instructions for building-in
Storage Shelves
The glass shelf above the fruit and vegetable compartment should always remain in position, to ensure fruit and vegetables stay fresh longer.
The remaining storage shelves can be adjusted to various heights:
Pull the storage shelf forward until it D338 can be tipped up or down and remo- ved.
To insert at a different height use the same procedure in reverse. Adjustment for tall goods:
Remove the front half of the
Variable Inner Door
The door compartments can be pulled up and removed, and inserted at other positions as needed.
Variable Storage Box
Some models are equipped with a variable storage box which is fitted under a door shelf compartment and can be slid sideways.
Apply the joint sealing strip as shown in figure.
Push appliance into the housing until stop strip (A) touches the kitchen unit.
D765 |
A |
D023 |
The box can be inserted under any door shelf compartment.
1. To change the position of the stora- ge box; lift the shelf compartment with the box upwards and out of the holders in the door and remove the retaining bracket out of the guide under the shelf compartment.
2.Reverse the above operation to insert
the shelf at a different height.
Open the door and push the appliance against the side of the kitchen unit op- posite to that of appliance hinges.
Fasten the appliance with 4 screws provided in the kit included with the appliance. Snap the ventilation grille
(C) and hinge cover (D) into position.
| D |
D723 | C |
8 | 21 |
