Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is not impeded by carpets, rugs etc.
•Before placing it on small tiles, apply a rubber coating.
•Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.
•If it is impossible to avoid positioning the machine next to a gas cooker or
•The machine must not be installed in rooms where the temperature can drop below 0°C.
•The water inlet hose and the drain hose must not be kinked.
•Please ensure that when the appliance is installed, it is easily accessi- ble for the engineer in the event of a breakdown.
Levelling
Carefully level by screwing the adjustable feet in or out. Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.
Installation on a suspended floor
Suspended wooden floors are particularly susceptible to vibration. To help prevent
vibration we recommend you place a waterproof wood panel, at least 15 mm thick under the appliance, secured to at least 2 floor beams with screws. If possible install the appliance in one of the corners of the room, where the floor is more stable.
Water inlet (cold water connection only)
Connect the hose | Model 16800 | Model 14800 |
to a tap with a |
|
|
3/4” thread. |
|
|
Installation |
|
|
should comply |
|
|
with local water |
|
|
authority and |
|
|
building regula- |
|
|
tions’ require- |
|
|
ments. |
|
|
50
