8Installation
To Level Freezer:
After discarding crating screws and wood base, use a carpenter's level to level the freezer from front to back. Adjust the plastic leveling feet in front, 1/2 bubble higher, so that the door closes easily when left halfway open.
Leveling Instructions For All Refrigerator / Freezer Pair:
•Remove two leg levelers provided in literature bag. While unit is lying on its back for wood skid removal, install both leg levelers in rear of unit.
•Level door of first unit using all four levelers and slide unit into place. Recheck for levelness and adjust if necessary.
•Measure distance from floor to bottom of door on first unit. Adjust and level second unit so door height matches.
•Leg Level Adjustments:
•One full turn of all four leg levelers will raise door 5/32".
•One full turn of both front leg levelers will raise door 3/16" and tilt top of door back 7/16".
•One full turn of both rear leg levelers will lower door 1/32" and tilt top of door forward 7/16".
•One full turn of both side leg levelers will raise door 3/16" and tilt top of door 3/8".
•Slide second unit into place leaving a minimum gap of 3/16" between units for door swing clearance.
•This last step may require at least one extraction of the second unit to properly align units in a
!CAUTION
To allow door to close and seal properly, do not let food packages extend past the front of the shelves.
