Installation 9
DOOR REMOVAL
If door must be removed:
• Unplug the unit
• Gently lay refrigerator on its back, on a rug or blanket.
• Remove two base screws and base panel. Remove wire from clips on bottom of cabinet, if required.
• Unplug connector, if required, by holding the cabinet connector in place and pulling the door connector out.
• Remove the bottom hinge screws.
• Remove the plastic top hinge cover.
• Remove the screws from the top hinge.
• Remove the top hinge from the cabinet.
• Remove the door and bottom hinge from the cabinet.
• To replace door, reverse the above procedures and securely tighten all screws to prevent hinge slippage.
SETTING THE TEMPERATURE CONTROLS
COOL DOWN PERIOD
For safe food storage, allow four (4) hours for refrigerator to cool down completely. The refrigerator will run continuously for the first several hours.
ELECTRONIC TEMPERATURE CONTROL
The electronic temperature control is located inside the refrigerator. Temperature is factory preset to provide satisfactory food storage temperatures. However, the temperature control is adjustable to provide a range of temperatures for your personal satisfaction. To adjust the temperature setting, move the UP ( ) button for warmer temperature and DOWN ( ) button for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments.
